UFC 3-260-11FA
25 May 2005
Administration specification may be substituted. If neither a USGS nor
FAA specification is available for a particular feature of work, the
Contractor may use specifications from other agencies or sources, or
provide custom-written specifications. Such specifications only may use
another software program than SPECSINTACT. The specifications for this
project shall be edited and submitted in hand marked-up or graphic
highlighted (via word processor or specification software) draft
version at the Final (60 percent) Review submittal stage.
UFGS shall be edited only as directed in the specification notes and
instructions, where choice options allow, and where features of work
are added or deleted. A minimum quality standard for the project shall
be maintained by only selecting among the choices for quantity and
quality that are presented in the applicable UFGS, unless specifically
indicated otherwise in Section 1016, Detailed Technical Requirements.
Manufacturer's catalog cut sheets will not be accepted as a substitute
for the "products" portion of the specifications, nor any other part.
Catalog cut sheets may be added to the specifications, but not as a
substitute.
Include with Contractor-prepared specifications all Sections from the
RFP (furnished by the Government in SPECSINTACT "sec" files) and
specification attachments (furnished by the Government in portable
document format and readable with Adobe Acrobat).
Project specifications shall be furnished in CSI, 40 Division, 3 Part
Section Format. Each specification volume shall include a cover page
and table of contents and be printed on 20-lb. white paper.
Specifications will also be provided in electronic format.
The cover page shall include:
a.
Project title, activity and location
b.
Construction contract number
c.
Construction Contractor's name and address
d.
Design firm's name and address
e.
Names of design team members responsible for each Contractor-
prepared technical discipline of the project specification
f.
Name and signature of a Principal of the design firm
g.
Line for the designated Government representative to sign and
date for the Government
01018 - 6
Previous Page
