UFC 3-280-04
17 DEC 2003
Table C-6. Vendor C [SI]
0.882.65
215
0.91
0.65
4.14
3.35
3.28
0.000280.00061
1,450
1.584.73
215
1.22
1.16
4.06
3.76
3.63
0.000280.00061
2,994
2.47.2
215
1.52
1.77
4.29
3.99
3.79
0.000470.00094
4,536
4.814.4
215
2.13
3.53
4.73
4.37
4.24
0.000940.00141
8,618
8.124
215
2.74
5.95
6.16
5.77
5.77
0.001420.00189
18,144
Reference: metric conversion of Vendor C internet catalog
Table C-6. Vendor C [English]
1442
215
3.0
7.0
13-7
11-0
10-9
0.61.3
1.6
2575
215
4.0
12.5
13-4
12-4
11-11
0.61.3
3.3
38114
215
5.0
19.0
14-1
13-1
12-8
1.02.0
5.0
76228
215
7.0
38.0
15-6
14-4
13-11
2.03.0
9.5
128384
215
9.0
64.0
20-6
18-11
18-11
3.04.0
20
Reference: Vendor C internet catalog
C-2.5
Evaluate the Parameters Using One, Two, or Three Units. If a single filter
is out of service, for repair or maintenance, the filtration system must be bypassed or
the flow stored. Consider the next smaller and next larger sizes. The next smaller size is
inadequate for the flow. Consider the next larger size if long outages requiring substan-
tial storage and higher pumping rates may be encountered. A 7-ft (2-m) diameter unit is
very large and difficult to replace; an 8-ft (2.5-m) unit even more so. Refer to vendor cut
sheets. Carefully consider the anticipated solids loading and any previous rounding up
before application of safety factors. Reject rate is independent of influent loading and
adds back to hydraulic loading.
C-12
Previous Page
