MIL-HDBK-1003/3
Section 10:
FUNDAMENTAL DRAWING DETAILS
10.1
General. Refer to Section 4 and the A-E Handbook
issued by the local NAVFACENGCOM EFD or EFA for an overview of
the information required on the drawings.
10.2
Specifics
10.2.1
System Diagrams and Schematics. See Figures 36 and 37
for examples of system diagrams and schematics.
10.2.2
Equipment Schedules. See Tables 18 through 20 for
examples of equipment schedules.
10.2.3
Riser Diagrams.
See Figures 38 and 39 for examples of
riser diagrams.
10.2.4
Duct Pressure Classifications. See Figure 40 for an
example showing duct pressure classifications.
10.2.5
Symbols and Abbreviations.
Consider the following when
using symbols and abbreviations:
a) Use symbols and abbreviations found in ASHRAE
Handbook, Fundamentals.
b) List only those symbols and abbreviations that are
used in the design.
c) Coordinate the various abbreviation lists to ensure
that the abbreviations are not duplicated.
137