UFC 3-240-13FN
25 May 2005
1-1.10
Support Available
1-1.10.1
Boiler and Cooling Water Quality Assurance (QA) Program. Submit
heating or cooling system water samples to a laboratory for analysis in accordance with
an appropriate water QA and quality control (QC) program. The purpose of QA is to
verify that applied treatment chemicals, control limits, and external treatment are
appropriate. QA is used to assist operators and managers to achieve accurate in-plant
chemical testing and control. The primary purpose for a QA/QC program is to ensure
and verify that the in-plant test results represent accurately tested and reported
concentrations of water treatment chemicals. If the QA/QC procedures are in error or
are not followed, or if the test results are not accurate, the consequences are reduced
safety, possible damage to the equipment, and wasted energy, chemicals, and water.
1-1.10.2
Other Support. Matters pertaining to military policy, requests for technical
staff visits to troubleshoot industrial water systems, training of water treatment
personnel, and general technical questions can be addressed to the appropriate military
office.
U.S. Army Corps of Engineers
441 G. Street, NW
Washington, D.C. 20314-1000
HQ AFCESA/CESM
139 Barnes Drive, Suite 1
Tyndall AFB, FL 32403-5319
U.S. Navy
Utilities Systems Branch Code 231
Naval Facilities Engineering Service Center
1100 23rd Ave.
Port Hueneme, CA 93043-4370
Comm (805) 982-3540
Also see Naval Facilities Instruction (NAVFACINST) 11300.37a.
1-2
INDUSTRIAL WASTEWATER. "Industrial wastewater" is a term that
refers to any water discharged from an industrial water system. This term applies
primarily to cooling tower and steam boiler blowdown; the term also applies to
discharged industrial process water (e.g., plating wastes).
1-2.1
Disposal Procedures. Coordinate the treatment and disposal of liquid
and solid (sludge) wastes from industrial systems with the installation environmental
engineer.
1-2.1.1
Water Discharge Pretreatment. Pretreatment of water discharge refers
to a treatment procedure that is applied to water before it is discharged to the storm
water system, the sanitary sewer system, or the base industrial wastewater treatment
6
Previous Page
