MIL-HDBK-1164
Table 49
Suggested Tools for Water Treatment Plants (1)
"C" clamps, assorted
Axes, spare ax handles
Cotter pin puller
Awls
Countersink, assorted for wood
Bars
or metal
Crow
Cutters, wire
Wrecking
Cutters, 1/2-inch (10-mm) bolt
Bit brace and assortment of bits for wood
Dies, assorted for bolt and pipe threading
and metal
stocks
Blacksmith's anvil, tools, forge, and hand
Drills, assorted
blower
1/2-inch (13-mm) electric, portable
Bolt stock and dies
with drill press stand mount
Breast drill and assortment of drills
3/8-inch (10-mm) electric, cordless,
12-voltDrills, assorted (continued)
Inside and outside
1/4-inch hand drill, heavy duty
1/4-inch hand drill, heavy duty
Caulking tools, water main type (assorted
Drill bits
sizes and types)
Twist drills, high speed fractional set
Chisels
1/16-inch to 1/2-inch x 64ths
Assorted
Twist drills, high speed metric set
Bull point
1.0-mm to 13 mm x 0.5 mm
Cape
Spade bits 1/4-inch to 1-1/2-inch by
1/8ths (6-mm to 40-mm)
Cold
Masonry bits, carbide tip,
Diamond point
for rotary drills 1/4-inch x 4-inch,
Round nose
5/16-inch x 4-inch, 3/8-inch x 4-inch,
1/2-inch x 6-inch (6-mm x 100-mm,
Assorted, wood
8-mm x 100-mm, 10-mm x 100-mm,
Assorted, for air hammer
13-mm x 150-mm)
239
Previous Page
