MIL-HDBK-1110
coating system. Today, the expense of containment of old paint
during its removal and disposal of debris that is often
considered to constitute hazardous waste must be included. This
usually means that the system with the maximum maintainable life
is the best choice.
4.3
Specifications for Lead- and Chromate-Free Coatings
With VOC Limits. The coating specifications listed below in
Table 5 are lead- and chromate-free and have limitations on their
contents of VOC.
Table 5
Lead- and Chromate-Free Coating Specifications With VOC Limits
Latex Coatings
Listed latex coatings are available with a VOC content of no more than 250
grams per liter unless otherwise specified
TT-P-19
Exterior acrylic emulsion coating, available in a wide
variety of colors and flat gloss finishes
TT-P-29
Interior latex paint, flat, available in white and tints
TT-P-650
Interior latex primer coating for gypsum board or plaster
TT-P-1510
Latex exterior flat finish coating, available in a variety
of colors
TT-P-1511
Latex interior coating, available in gloss and semigloss
in white and tints
TT-P-1728
Latex, interior, flat, deep-tone coating
TT-P-001984
Primer, latex, for wood
TT-P-002119
Latex high-traffic coating, available in flat and eggshell
and a variety of colors
TT-E-2784
Acrylic emulsion exterior enamel, gloss and semigloss,
available in a wide variety of colors
MIL-E-24763
Acrylic water-emulsion coating intended for shipboard use,
available in 275 and 340 grams per liter VOC classes;
high, medium, low, and flat glosses; and a limited number
of colors
MIL-P-28577
Corrosion-resistant latex primer for metals
Stains
MIL-P-28578
Waterborne acrylic semigloss finish, available in a wide
variety of colors
TT-S-001992
Exterior latex stain, semi-transparent and opaque,
available in a variety of colors
Clear Floor Finishes
A variety of clear floor finishes are available from the Maple Flooring
Manufacturers Association (MFMA) specifications, Heavy-Duty and Gymnasium
Finishes forMaple, Beech, and Birch Floors. Suppliers on the attached
list must be contacted to determine VOC content.
Oil and Alkyd Coatings
SSPC PAINT-25
Corrosion-resistant raw linseed oil and alkyd primer,
usually available at 300 grams per liter VOC but no
requirement listed
38
Previous Page
