TM 5-805-8
Table 1. Specifications tor Hardware Finishes. - continued
BHMA CODE
DESCRIPTION
BASE MATERIAL
ALUMINUM DOOR LOCK AND TRIM
626
Satin chromium plated
Brass, bronze
628
Satin aluminum, clear anodized
Aluminum
630
Satin Stainless steel
Stainless steel
MAIN ENTRANCE DOOR LOCK AND TRIM
612
Satin bronze, clear coated
Bronze
626
Satin chromium plated
Brass, bronze
628
Satin aluminum, clear anodized
Aluminum
630
Satin stainless steel
Stainless steel
OTHER LOCK AND TRIM
612
Satin bronze, clear coated
Bronze
626
Satin chromium plated
Brass, bronze
628
Satin aluminum, clear anodized
Aluminum
630
Satin stainless steel
Stainless steel
639
Plated satin bronze, clear coated
Steel
652
Satin chromium plated
Steel
DOOR CLOSERS
600
Primed for painting
Steel
689
Aluminum painted
Any
690
Dark bronze painted
Any
691
Light bronze painted
Any
692
Tan painted
Any
21.
Computerized key control system
22. Contract drawings and specifications
Drawings and specifications will include the following
This system will provide the most effective method for
information, as indicated.
a. Door identification number (drawings - floor plans
documenting, issuing, and controlling all keys, of all
types for a given facility. The system enables one to store
and door schedule).
b. Hardware set number (HW-1) (drawings - door
on the computer a complete description of all keyed
items including index numbers, location of opening, lock
schedule only; and specifications - detailed listing).
c. Door and frame materials and construction (draw-
manufacture, key number, related master keys and grand
master keys, total number of existing keys, and number
ings and specifications).
d. Swing of door (drawings - floor plan only).
of keys currently on loan. This system is cost effective as
e. Door and frame sizes and design including height,
compared to conventional key control systems. It will not
only provide the using agency with accurate control, but
width, and thickness of door, thickness of stop, and
also security, convenience, and flexibility.
width of frame (drawings).
f. Finish and the locations (specifications).
g. Key set symbol (specifications).
h. Key schedule (specifications).
10
Previous Page
