UFC 3-120-01
FEBRUARY 6 2003
2.25.1. Placement. Place the Community Facility Signs, Types C2 and C3, as close as possible to
the building entrance, and perpendicular to the roadway to permit viewing by traffic moving in
both directions (Figure 2.43). Avoid placing freestanding community signs where other wall-
mounted signs exist that are easily readable from the street, such as exchanges and
2.25.2. Visibility. If the facility is set back from the roadway and is not visible or only partially
visible from the roadway, place the sign next to the entrance driveway (Figure 2.43).
2.25.3. Relationship to Parking. Place the sign no less than 2.4 m (8') from the entrance to the
parking area.
2.26. Community Building Entry Sign Type C4.
2.26.1. Placement. Place the Community Building Entry sign, Type C4, directly on the wall next
to the secondary entry point (Figure 2.45).
2.26.2. Visibility. If the building is set back from the roadway and is not visible or only partially
visible from the roadway, place the sign next to the main entrance of the building to confirm the
information shown on the sign at the entrance driveway (Figure 2.46).
Figure 2.43. Community Facilities Sign Placement.
49
Previous Page
