CEMP-E
TI 809-26
1 March 2000
Table D-5. Radiographic Testing
Most Applicable
Applicable
Least Applicable
Longitudinal Cracks
Surface Pore
Microcracks
Transverse Cracks
Shrinkage Cavity
Overlap
Radiating Cracks
Crater Pipe
D
Crater Cracks
Incomplete Fusion
i
Group Discontinuous
(Sidewall or Interpass)
s
Cracks
Undercut
c
Branching Cracks
Excessive Reinforcement
o
Uniform Porosity
Excessive Convexity
n
Linear Porosity
Excessive Penetration
t
Elongated Cavity
Burn-Through
i
"Worm Hole"
Underfilled Groove
n
Solid Inclusion
Root Concavity
u
Slag or Flux Inclusion
Miscellaneous Surface
i
Oxide Inclusion
Discontinuities (Spatter, etc.)
t
Metallic Inclusion
y
Incomplete Fusion (Root)
Incomplete Penetration
Lap, 6-15 mm (0.2 - 0.6 in.)
Lap, < 6 mm (< 0.2 in.)
Joint
Both-Side Access
Lap, 16 - 50 mm (0.6 - 2 in.)
Double-V Groove
Lap, > 50 mm (> 2 in.)
Single-V Groove
D-11
Previous Page
