TM 5-809-3/NAVFAC DM-2.9/AFM 88-3, Chap. 3
APPENDIX B
DESIGN AIDS FOR REINFORCED MASONRY WALLS
Purpose. This appendix contains design aids that may be used in the
B-1.
design of reinforced masonry walls. Table B-1 through B-14 provide the
properties of wall stiffeners with varying reinforcement, wall thickness and
mortar type. Table B-15 through B-50 provide reinforcing steel spacing for
varying wall heights, lateral loads, wall thickness, axial load, bar size and
eccentricity. The values in the tables were determined using a T-section analysis
when applicable.
B-1
Previous Page
