Home
Download PDF
Order CD-ROM
Order in Print
Home
>
United Facilities Criteria CD 1
>
> Dust Control For Roads, Airfields, and Adjacent Areas - index
Dust Control For Roads, Airfields, and Adjacent Areas - index
Chapter 1. Introduction - ufc_3_260_170008
Factors influencing dust
Figure 1.1. Three Examples of Typical Dust Clouds.
Chapter 2. Factors for Consideration
Topography
Climate - ufc_3_260_170013
Chapter 3. Dust Control Methods
Surface penetration method
Types of materials.
Resinous materials.
Admix method
Offsite admixing
Surface- blanket method
Polypropylene-asphalt membrane.
Figure 3-1. Special distributor for the three-step process of applying the DCA 1295.
Figure 3-3. Polypropylene membrane layout for tangential sections.
Chapter 4. Dust Palliatives
Table 4-1. Dust palliative numbers for dust control in nontraffic area.
Table 4-2. Dust Palliative Numbers for Dust control in Occasional Traffic Area.
Table 4-3. Dust Palliative Numbers for Dust Control In Traffic Area.
Table 4-4. Dust Palliative Electives.
Table 4-4. Dust Palliative Electives- Cont. - ufc_3_260_170029
Table 4-4. Dust Palliative Electives- Cont. - ufc_3_260_170030
Cure
Chapter 5. Economics
Figure 5-1. Typical Pump Modifications for Conventional Asphalt Distributor.
Final Selection
Appendix B. Control of Windborne Sand
Figure B-1. Types of Fixed Sand Dunes
Section II: Control Methods
Figure B-4. Three Fences Installed to control Dune Formation
Paneling
Mechanical removal