MIL-HDBK-1110
Personnel exposed to contamination should thoroughly shower and
put on clean clothes before leaving work area. Torn clothing
should not be worn, because it can get caught in machinery or on
structural projections. Trouser cuffs and ties present a similar
problem.
13.7.1.1 Gloves. Gloves come in different lengths and chemical
compositions. The length should provide full protection, and the
material should be resistant to the chemicals and materials with
which it will come into contact. Selection of the right work
glove can protect you from unnecessary injury or contamination.
Commonly used protective gloves include:
a) Disposable gloves - usually lightweight plastic;
protect from mild irritants
b) Fabric gloves - cotton or other fabric; improve
grip; minimal protection from contaminants
c) Rubber gloves - may also be of different plastics;
protection from chemical contamination
d)
Leather gloves - protect from abrasion
e) Metal mesh gloves - protect from cuts/scratches;
used with cutting tools
f)
Aluminized gloves - insulates hands from intense
heat
13.7.2
Protective Headgear. Head injuries can be very
devastating and can result in brain damage or death. Selection
of the proper head protection for different hazards is especially
important. Protective headgear includes:
a)
Hard hats
b)
Bump hats
c)
Hair covers
13.7.2.1 Hard Hats. Hard hats are made of rigid, impact-
resistant, nonflammable materials such as fiberglass or
thermoplastics. A network of straps and harnesses holds the
shell on the head and serves as a cushion. A full-brimmed hard
hat provides general protection to the head, neck, and shoulders,
192
Previous Page
