25 May 2005
Silt fence drop inlet protection
Stone construction entrances
The location of the measures shall be in two (2) phases. Phase 1
shall consist of construction of the silt fence, construction
entrance, and inlet protection. These items will be in place
prior to any clearing and grading operations. Phase 2 will
consist of placing additional erosion-control measures to protect
new construction in addition to the surrounding environment.
These will remain in place until permanent stabilization is
Permanent storm water pollution prevention measures include
protective measures to direct surface water away from open
requirements will be specified in Specification Section 02921 of
the Technical Specifications.
AIRCRAFT ARRESTING SYSTEM(S)
Provide a narrative description of all Aircraft Arresting System
work in the project, including type of system and whether the
equipment housing is to be installed above or below ground.
The 35E8-series Technical Orders include a separate order for
each type of aircraft arresting system. Include the 35E8-series
reference number for the type of system required and instructions
for obtaining a copy.
UFC 3-260-01, Airfield and Heliport Planning and Design, Chapter
AFI 32-1043, Managing,
The Government will furnish Aircraft Arresting Gear equipment,
delivered to the job site, in conformance with the equipment list
in the Government-Furnished Design Analysis.
01016 - 24