Table 25 (Continued)
Inspect, clean, adjust, disassemble, and
repair as necessary (see manufacturer's
Lubricate gears (see manufacturer's
M or Q
Check gear operation through full
operating cycle; listen for undue noise, etc.
Check housing for corrosion; paint as
Clean debris out of box; inspect for
corrosion; check alignment and adjust as
Lubricate stem and indicator collars.
Inspect condition; clean and paint.
Check contact points, wiring, etc.
(1) W-Weekly; M-Monthly; Q-Quarterly; SA-Semiannually; A-Annually; V-Variable,
as conditions may indicate.
(2) The frequencies shown are suggested frequencies that may be modified by
local command, as individual installation conditions warrant.