FEBRUARY 6 2003
Figure 7.3. Unit Morale Sign Type F3.
Section 7B--Base Morale Signs
7.7. Base Morale Sign Type F1a.
7.7.1. General Introduction. The Base Morale Sign, Type F1a, identifies the principal
organizations on base or displays the command hierarchy for the base.
7.7.2. Placement and Information. This sign is placed inside the main gate or at a central location
on base, and may show the command shield, organizational emblems, mottoes, awards and other
elements related to base morale.
7.7.3. Design Parameters. The design of the sign may vary. The sign shown below is for
illustration only. There are no restrictions on the use of color or the character of the specific
design, but the sign should be professionally designed and fabricated.
7.7.4. Dimensions. The dimensions should not exceed 1 200 mm x 3 000 mm (4'- 0" x 10'- 0").