25 May 2005
Change 1, 22 February 2006
Change 2, 4 December 2006
Intercommunication Riser Diagram.
Fire Alarm Riser Diagram: Include only when separate Fire Protection
Drawings are not required to be included in the design.
Other Riser Diagrams for Television, Security, and similar systems.
Switchboards and Motor Control Center Schedules.
Lighting Fixture Details.
Provide, as a minimum, all noted drawings in UFC 3-600-10N in addition to drawing
requirements specified for Design Development.
Specifications or RFP Development.
Provide edited, red-lined specification sections, showing deletions from and additions to
the master guide specification sections. Red-line other parts of the RFP when required
by the contract. When using SpecsIntact, deletions should be shown in bold print and
lined out. Additions should be shown in bold print, italicized, and underlined. This
special editing feature will have to be reset each time SpecsIntact program is updated.
To do this, open a job; go into a section and select "Format."
Design submittal or RFP Development should be complete at this stage and require
only minor corrections if any. Organize RFP and specifications in accordance with
Chapters 3 and 5, respectively. Provide a submittal register with the specifications.
Request NAVFAC Drawing Numbers from the Government at this stage.
When using SpecsIntact, run all verification reports when printing. Print project
specification sections with the official date of release of the master guide specification to
display the version of the specification used. This date appears immediately below the
specification section title.
Provide additional requirements for Environmental specifications as required by UFC 3-
Design-Build Design Submittals.
For Design-Build projects, follow the requirements of the RFP when manufacturer's
catalog data is used in lieu of prescriptive specifications.
Fire Protection Specifications.